IBM Books

MRS V3.3 Protocol Config Ref Vol 2


Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (1798)
  • accounting and node statistics (1333)
  • activate
  • APPN monitoring command (1395)
  • activate_new_config
  • APPN configuration command (1386)
  • add
  • AppleTalk Phase 2 configuration command (1432)
  • APPN configuration command (1368)
  • IPv6 configuration command (1766)
  • IPv6 update packet filter configuration command (1784)
  • NDP configuration command (1838)
  • OSI configuration command (1655)
  • RIP6 configuration command (1916)
  • VINES configuration command (1471)
  • Address Resolution Protocol (ARP)
  • VINES (1466)
  • addresses
  • OSI/DECnet V monitoring command (1673)
  • aping
  • APPN monitoring command (1397)
  • AppleTalk Control Protocol
  • for PPP (1420)
  • AppleTalk Phase 2
  • basic configuration procedures (1416), (1423)
  • configuring (1415)
  • monitoring (1426)
  • network parameters (1418), (1424)
  • router parameters (1417)
  • AppleTalk Phase 2 configuration commands
  • add (1431)
  • delete (1433)
  • disable (1435)
  • enable (1437)
  • list (1439)
  • set (1441)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1443)
  • cache (1445)
  • clear counters (1447)
  • counters (1448)
  • dump (1450)
  • interface (1452)
  • APPN
  • monitoring (1389)
  • APPN (DLSw) (1313)
  • APPN configuration commands
  • activate_new_config (1385)
  • add (1367)
  • delete (1381)
  • enable/disable (1359)
  • list (1383)
  • set (1362)
  • TN3270 (1358)
  • APPN Frame Relay BAN Connection Network (1339), (1375), (1376)
  • APPN monitoring commands
  • accessing (1391)
  • activate (1394)
  • aping (1396)
  • deactivate (1398)
  • dump (1400)
  • list (1402)
  • memory (1404)
  • restart (1406)
  • stop (1408)
  • summary (1393)
  • test (1410)
  • tn3270e (1412)
  • atecho
  • AppleTalk Phase 2 monitoring command (1444)
  • ATM
  • APPN using (1353)
  • ATM LAN Emulation
  • configuring DNA IV (1507)
  • B
  • before you configure (1325)
  • Border Node
  • COS mapping table (1380)
  • routing list (1379)
  • Branch Extender (1274), (1277), (1314), (1369), (1370) , (1371), (1372), (1373), (1374), (1378)
  • C
  • cache
  • AppleTalk Phase 2 monitoring command (1446)
  • IPv6 monitoring command (1800)
  • change
  • IPv6 configuration command (1768)
  • IPv6 update packet filter configuration command (1786)
  • NDP configuration command (1840)
  • RIP6 configuration command (1918)
  • change metric
  • OSI/DECnet V monitoring command (1675)
  • change prefix-address (1658)
  • clear (1660)
  • PIM monitoring command (1884)
  • Client IP Address to LU Name Mapping (1300)
  • CLNP protocol (1586)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1677)
  • command summary
  • DNA IV (1533)
  • configurable Held Alert Queue (1288), (1324), (1366)
  • configuration changes, affect on the router (1310)
  • configuration options (1311)
  • configuration requirements (1312)
  • connection networks (1273)
  • COS (1328)
  • COS mapping table (1318)
  • counters
  • AppleTalk Phase 2 monitoring command (1449)
  • IPv6 monitoring command (1802)
  • VINES monitoring command (1487)
  • D
  • DDD LU
  • TN3270E Server and (1304)
  • DDDLU (1291)
  • deactivate
  • APPN monitoring command (1399)
  • DECnet NCP
  • See NCP (1496)
  • delete
  • AppleTalk Phase 2 configuration command (1434)
  • APPN configuration command (1382)
  • IPv6 configuration command (1770)
  • IPv6 update packet filter configuration command (1788)
  • NDP configuration command (1842)
  • OSI configuration command (1662)
  • PIM configuration command (1868)
  • RIP6 configuration command (1920)
  • VINES configuration command (1472)
  • destination devices (1738)
  • dhcpv6-relay
  • NDP monitoring command (1856)
  • Dial on Demand (1347)
  • APPN using (1346)
  • Digital Network Architecture (DNA) phase IV (1495)
  • disable
  • AppleTalk Phase 2 configuration command (1436)
  • APPN configuration command (1361)
  • IPv6 configuration command (1772)
  • NDP configuration command (1844)
  • OSI configuration command (1664)
  • PIM configuration command (1870)
  • RIP6 configuration command (1922)
  • VINES configuration command (1473)
  • DLUR (1270), (1271), (1321), (1322), (1335)
  • DLUR retry algorithm (1336)
  • DNA IV
  • access control
  • configuring (1521)
  • exclusive (1523)
  • inclusive (1522)
  • managing traffic (1520)
  • addressing
  • 802.5 Token (1506)
  • description (1504)
  • Ethernet data link (1505)
  • X.25 data link (1509)
  • area routers
  • description (1514)
  • level 1 (1515)
  • level 2 (1516)
  • area routing filters (1524)
  • area support of (1498)
  • blending domains (1525)
  • configuration
  • for X.25 (1528)
  • configuring over ATM LAN Emulation (1508)
  • designated router for (1512)
  • LAT protocol (1501)
  • MOP support of (1499)
  • Network Control Program (NCP) (1518)
  • See NCP (1497)
  • routing (1510), (1511)
  • routing parameters (1517)
  • routing tables (1513)
  • special considerations and limitations (1502)
  • terminology and concepts (1503)
  • DNA IV configuration commands
  • define
  • circuit (1536)
  • executor (1538)
  • module access (1540)
  • module routing (1542)
  • node (1544)
  • help (1534)
  • purge
  • module access (1548)
  • module routing (1550)
  • show
  • area (1556)
  • node (1558)
  • show/list
  • circuit (1562)
  • executor (1564)
  • module access (1566)
  • module routing (1568)
  • zero
  • circuit (1574)
  • executor (1576)
  • module access (1572), (1578)
  • DNA IV monitoring commands
  • define
  • circuit (1537)
  • executor (1539)
  • module access (1541)
  • module routing (1543)
  • node (1545)
  • help (1535)
  • purge
  • module access (1549)
  • module routing (1551)
  • show
  • area (1557)
  • node (1559)
  • show/list
  • circuit (1563)
  • executor (1565)
  • module access (1567)
  • routing (1569)
  • zero
  • circuit (1575)
  • executor (1577)
  • module access (1579)
  • module_access (1573)
  • DNA V
  • networks (1526)
  • X.25 configuration
  • Count 2 (1527)
  • DNAV-info
  • OSI/DECnet V monitoring command (1681)
  • dump
  • AppleTalk Phase 2 monitoring command (1451)
  • APPN monitoring command (1401)
  • IPv6 monitoring command (1804)
  • NDP monitoring command (1858)
  • PIM monitoring command (1882)
  • RIP6 monitoring command (1936)
  • VINES (1489)
  • Dynamic Definition of Dependent LUs (1290)
  • host-initiated (1292), (1306)
  • TN3270E Server and (1303)
  • TN3270E Server and host-initiated (1305)
  • E
  • enable
  • AppleTalk Phase 2 configuration command (1438)
  • APPN configuration command (1360)
  • IPv6 configuration command (1774)
  • NDP configuration command (1846)
  • OSI configuration command (1666)
  • PIM configuration command (1872)
  • RIP6 configuration command (1924)
  • VINES configuration command (1476)
  • Enterprise Extender Support for HPR over IP (1308)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1683)
  • ES-IS protocol (1584)
  • description (1647)
  • hello message (1648)
  • es-is-stats
  • OSI/DECnet V monitoring command (1685)
  • exclude lists (1734)
  • exit (1429)
  • console command (1430)
  • VINES monitoring command (1493)
  • Extended Border Node (1275), (1278)
  • configuring (1315)
  • COS mapping table (1319)
  • network requirements (1276)
  • routing list (1317)
  • extensions
  • IBM vendor-private extensions. (1742)
  • path information extensions (1739)
  • F
  • features
  • IP version 6 (IPv6) (1758)
  • focal point (1282), (1323)
  • G
  • getting help (1427)
  • H
  • help
  • console command (1428)
  • How LUs are chosen for client connections (1302)
  • HPR (1269), (1320)
  • I
  • IBM-specific extensions
  • NHRP (1741)
  • implementation on the router (1267)
  • implicit focal point (1289), (1377)
  • interface
  • AppleTalk Phase 2 monitoring command (1453)
  • IPv6 monitoring command (1806)
  • PIM monitoring command (1886)
  • intermediate session data, collecting (1334)
  • internal
  • IPv6 monitoring command (1808)
  • IP
  • packet size (1957)
  • IPv6
  • configuring (1761)
  • overview (1760)
  • using (1759)
  • ipv6 command (1763)
  • IPv6 configuration commands
  • add (1765)
  • change (1767)
  • delete (1769)
  • disable (1771)
  • enable (1773)
  • list (1775)
  • move (1777)
  • set (1779)
  • summary (1764)
  • update (1781)
  • IPv6 monitoring commands
  • access-control (1797)
  • accessing (1793)
  • cache (1799)
  • counters (1801)
  • dump (1803)
  • interface (1805)
  • internal (1807)
  • mcast (1809)
  • mld (1811)
  • packet-filter (1823)
  • path-mtu (1825)
  • ping6 (1827)
  • reset (1813)
  • route (1815)
  • sizes (1817)
  • sniffer (1819)
  • static (1821)
  • summary of (1795)
  • traceroute (1907)
  • traceroute6 (1829)
  • tunnels (1831)
  • IPv6 update packet filter configuration commands
  • add (1783)
  • change (1785)
  • delete (1787)
  • list (1791)
  • move (1789)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1687)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1607)
  • point-to-point (1613)
  • IS-IS protocol
  • description (1601)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1610)
  • L2 (1612)
  • IS-IS areas (1602)
  • IS-IS domain (1605)
  • overview (1585)
  • is-is-stats
  • OSI/DECnet V monitoring command (1689)
  • ISDN Permanent Circuit
  • APPN using (1344)
  • ISDN permanent connection (1345)
  • J
  • join
  • PIM monitoring command (1888)
  • L
  • l1-routes
  • OSI/DECnet V monitoring command (1691)
  • l1-Summary
  • OSI/DECnet V monitoring command (1695)
  • l1-Update
  • OSI/DECnet V monitoring command (1699)
  • l2-Routes
  • OSI/DECnet V monitoring command (1693)
  • l2-Summary
  • OSI/DECnet V monitoring command (1697)
  • l2-Update
  • OSI/DECnet V monitoring command (1701)
  • lane shortcut interface (LSI)
  • NHRP (1731)
  • leave
  • PIM monitoring command (1890)
  • link level parameter lists (1341)
  • list
  • AppleTalk Phase 2 configuration command (1440)
  • APPN configuration command (1384)
  • APPN monitoring command (1403)
  • IPv6 configuration command (1776)
  • IPv6 update packet filter configuration command (1792)
  • NDP configuration command (1848)
  • NDP monitoring command (1860)
  • OSI configuration command (1668)
  • PIM configuration command (1874)
  • RIP6 configuration command (1926)
  • RIP6 monitoring command (1934)
  • VINES configuration command (1479)
  • Local Area Terminal (LAT) protocol (1500)
  • LSI (1732) See also lane shortcut interface (LSI)
  • LU parameter list (1342)
  • LU Pooling (1296)
  • M
  • managing network nodes (1280)
  • managing the router network node (1279)
  • mcache
  • PIM monitoring command (1892)
  • mcast
  • IPv6 monitoring command (1810)
  • memory
  • APPN monitoring command (1405)
  • message units, supported, APPN-related alerts
  • mgroup
  • PIM monitoring command (1894)
  • mld
  • IPv6 monitoring command (1812)
  • monitoring
  • APPN (1390)
  • IPv6 monitoring commands (1796)
  • NDP monitoring commands (1854)
  • PIM monitoring commands (1880)
  • RIP6 monitoring commands (1932)
  • move
  • IPv6 configuration command (1778)
  • IPv6 update packet filter configuration command (1790)
  • mstats
  • PIM monitoring command (1896)
  • Multiple TN3270 ports (1298)
  • N
  • NCP
  • description of (1519)
  • NCP configuration commands
  • purge (1547)
  • set (1553)
  • show (1555)
  • show circuit (1561)
  • summary of (1529)
  • zero (1571)
  • NCP monitoring commands
  • purge (1546)
  • set (1552)
  • show (1554)
  • show circuit (1560)
  • summary of (1530)
  • zero (1570)
  • NDP
  • configuring (1833)
  • NDP command (1835)
  • NDP configuration commands
  • add (1837)
  • change (1839)
  • delete (1841)
  • disable (1843)
  • enable (1845)
  • list (1847)
  • set (1849)
  • summary (1836)
  • NDP monitoring commands
  • accessing (1851)
  • dhcpv6-relay (1855)
  • dump (1857)
  • list (1859)
  • ping6 (1861)
  • summary of (1853)
  • neighbor
  • PIM monitoring command (1898)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1422)
  • Next Hop Resolution Protocol See also NHRP
  • overview (1717)
  • next-hop routers (1736)
  • NHRP (1714)
  • benefits (1718)
  • destination devices (1737)
  • examples
  • classic IP environment (1720)
  • classic IP environment with non-NHRP device (1721)
  • Egress Router (1725)
  • LAN emulation (1722)
  • LAN switches (1723)
  • mixed classical IP and ELAN (1724)
  • exclude lists (1733)
  • implementation (1726)
  • disallowed router-to-router shortcuts (1743)
  • IBM-specific extensions (1740)
  • LANE shortcuts (1730)
  • limitations (1719)
  • next-hop routers (1735)
  • virtual network interface (VNI) (1727)
  • NHRP configuration commands (1716)
  • accessing (1745)
  • add (1751)
  • advanced (1749)
  • change (1753)
  • delete (1752)
  • disable (1748)
  • enable (1747)
  • list (1750), (1754)
  • set (1755)
  • summary (1746)
  • NHRP interfaces
  • configuring (1715)
  • monitoring (1744)
  • NHRP monitoring commands
  • accessing (1756)
  • list of (1757)
  • node level parameter lists (1343)
  • node tuning (1329)
  • node types (1266)
  • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1636), (1637), (1639), (1641), (1643)
  • attached L2 IS routers (1628)
  • authentication passwords (1645)
  • designated IS (1616)
  • domain specific part (DSP) (1592)
  • end system (ES) (1580)
  • end system hello messages (1649)
  • ES-IS protocol (1646)
  • external routing (1635)
  • initial domain part (IDP) (1590)
  • description (1591), (1593)
  • intermediate system (IS) (1582)
  • internal routing (1634)
  • IS hello messages (1650)
  • IS to IS hello (IIH) messages (1608), (1614)
  • IS-IS addressing format (1594)
  • address format (1599)
  • AFI (1640)
  • area address (1596)
  • default address prefixes (1644)
  • fixed length IDI (1638)
  • non-pseudonode (1621), (1625)
  • point-to-point (1615)
  • pseudonode (1623), (1627)
  • selector (1598)
  • system ID (1597)
  • variable length IDI (1642)
  • IS-IS areas (1603)
  • IS-IS domain (1604)
  • L1 IIH message (1609)
  • L1 link state updates (1620), (1622)
  • L1 routing (1631)
  • L2 IIH messages (1611)
  • L2 link state updates (1624), (1626)
  • L2 routing (1632)
  • link state databases (1618)
  • link state updates (1619)
  • multicast addresses (1600)
  • network address structure (1589)
  • network addresses (1588)
  • Network Entity Title (NET) (1595)
  • network protocol data units (NPDU) (1581)
  • NSAP addressing (1587)
  • protocols running under (1583)
  • pseudonode (1617)
  • routing metric (1633)
  • routing tables (1630)
  • synonymous areas (1606)
  • unattached L2 IS routers (1629)
  • optional features (1268)
  • OSI
  • configuring (1651)
  • X.25 over OSI (1656)
  • OSI configuration commands
  • add (1654)
  • change prefix address (1657)
  • clear (1659)
  • delete (1661)
  • disable (1663)
  • enable (1665)
  • list (1667)
  • set (1669)
  • summary of (1653)
  • OSI/DECnet V
  • monitoring (1652)
  • OSI/DECnet V monitoring commands
  • addresses (1672)
  • change metric (1674)
  • clnp-stats (1676)
  • designated-router (1678)
  • DNAV-info (1680)
  • es-adjacencies (1682)
  • es-is-stats (1684)
  • is-adjacencies (1686)
  • is-is-stats (1688)
  • l1-routes (1690)
  • l1-summary (1694)
  • l1-update (1698)
  • l2-routes (1692)
  • l2-summary (1696)
  • l2-update (1700)
  • OSI/DECnet V monitoring command (1679)
  • ping-1139 (1702)
  • route (1704)
  • send (echo packet) (1706)
  • subnets (1708)
  • summary of (1671)
  • toggle (alias/no alias) (1710)
  • traceroute (1712)
  • P
  • packet size (1955)
  • packet-filter
  • IPv6 monitoring command (1824)
  • path-mtu
  • IPv6 monitoring command (1826)
  • PIM
  • pim
  • configuring (1863)
  • PIM monitoring command (1900)
  • PIM command (1865)
  • PIM configuration commands
  • delete (1867)
  • disable (1869)
  • enable (1871)
  • list (1873)
  • set (1875)
  • summary (1866)
  • PIM monitoring commands
  • accessing (1877)
  • clear (1883)
  • dump (1881)
  • interface (1885)
  • join (1887)
  • leave (1889)
  • mcache (1891)
  • mgroup (1893)
  • mstats (1895)
  • neighbor (1897)
  • pim (1899)
  • ping (1903)
  • summary of (1879)
  • summary pim (1901)
  • variables (1909)
  • ping
  • PIM monitoring command (1904)
  • ping-1139
  • OSI/DECnet V monitoring command (1703)
  • ping6
  • IPv6 monitoring command (1828)
  • NDP monitoring command (1862)
  • RIP6 monitoring command (1938)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1421)
  • port level parameter lists (1340)
  • port types supported (1309)
  • Protocols
  • protocols
  • BGP (1945)
  • comparison table (1943)
  • Digital Network Architecture (DNA) Phase IV (1494)
  • FTP (1946)
  • ICMP (1948)
  • IP (1949)
  • IPX (1950)
  • key to (1944)
  • RIP (1951)
  • SGMP (1952)
  • SNMP (1953)
  • TCP (1954)
  • TFTP (1947)
  • R
  • reset
  • IPv6 monitoring command (1814)
  • RIP6 monitoring command (1906), (1940)
  • restart
  • APPN monitoring command (1407)
  • restrictions (1337)
  • RIP6
  • configuring (1911)
  • RIP6 command (1913)
  • RIP6 configuration commands
  • add (1915)
  • change (1917)
  • delete (1919)
  • disable (1921)
  • enable (1923)
  • list (1925)
  • set (1927)
  • summary (1914)
  • RIP6 monitoring commands
  • accessing (1929)
  • dump (1935)
  • list (1933)
  • ping6 (1937)
  • reset (1905), (1939)
  • summary of (1931)
  • traceroute6 (1941)
  • route
  • IPv6 monitoring command (1816)
  • OSI/DECnet V monitoring command (1705)
  • routing list (1316)
  • RU size (1330), (1364), (1365)
  • S
  • SDLC (1355)
  • APPN using (1354)
  • Seed router
  • AppleTalk Phase 2 (1419), (1425)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1707)
  • set
  • AppleTalk Phase 2 configuration command (1442)
  • APPN configuration command (1363)
  • IPv6 configuration command (1780)
  • NDP configuration command (1850)
  • OSI configuration command (1670)
  • PIM configuration command (1876)
  • RIP6 configuration command (1928)
  • VINES configuration command (1481)
  • sizes
  • IPv6 monitoring command (1818)
  • sniffer
  • IPv6 monitoring command (1820)
  • SNMP managed node, using the router as (1286)
  • sphere of control (1283)
  • static
  • IPv6 monitoring command (1822)
  • stop
  • APPN monitoring command (1409)
  • subnets
  • OSI/DECnet V monitoring command (1709)
  • summary of
  • NCP configuration commands (1531)
  • NCP monitoring commands (1532)
  • summary pim
  • PIM monitoring command (1902)
  • supported message units (1284)
  • supported message units, APPN-related alerts (1285)
  • T
  • talk
  • OPCON command (1392), (1762), (1794), (1834), (1852) , (1864), (1878), (1912), (1930)
  • test
  • APPN monitoring command (1411)
  • TG characteristics (1327)
  • the router as entry point (1281)
  • TN3270 gateway function (1294)
  • tn3270e
  • APPN monitoring command (1413)
  • TN3270E Server (1293), (1307)
  • Client IP Address to LU Name Mapping (1299)
  • configuration commands (1387)
  • Configuration parameters (1388)
  • Configuring, using DLUR (1356)
  • Configuring, using local node identifier (1357)
  • How LUs are chosen for client connections (1301)
  • LU Pooling (1295)
  • monitoring commands (1414)
  • Multiple TN3270 ports (1297)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1711)
  • Token-Ring 4/16
  • packet size (1956)
  • topology Database Garbage Collection (1287)
  • traceroute
  • IPv6 monitoring command (1908)
  • OSI/DECnet V monitoring command (1713)
  • traceroute6
  • IPv6 monitoring command (1830)
  • RIP6 monitoring command (1942)
  • traces (1331)
  • tracing (1332)
  • transmission group characteristics, setting (1326)
  • transporting data (1338)
  • tunnels
  • IPv6 monitoring command (1832)
  • U
  • update
  • IPv6 configuration command (1782)
  • using the router as SNMP managed node
  • V
  • V.25 bis (1351)
  • V.25bis
  • APPN using (1350)
  • V.34
  • APPN using (1352)
  • variables
  • PIM monitoring command (1910)
  • VINES (1480)
  • Address Resolution Protocol (ARP) (1467)
  • basic configuration procedures (1468)
  • client nodes (1457)
  • configuring (1454)
  • disabling an interface (1474)
  • disabling globally (1475)
  • enabling an interface (1477)
  • enabling globally (1478)
  • monitoring (1469)
  • monitoring commands (1485)
  • neighbor tables (1462)
  • dumping (1490)
  • setting size (1484)
  • network layer protocols (1458)
  • Address Resolution Protocol (ARP) (1465)
  • Internet Control Protocol (ICP) (1464)
  • Routing Update Protocol (RTP) (1460)
  • VINES IP (1459)
  • overview (1455)
  • routing tables (1461)
  • dumping (1491)
  • setting size (1483)
  • RTP implementation (1463)
  • service nodes (1456)
  • setting number of client nodes (1482)
  • VINES configuration commands (1470)
  • VINES monitoring commands
  • counters (1486)
  • dump (1488)
  • exit (1492)
  • virtual network interface (VNI)
  • NHRP (1728)
  • VNI (1729) See also virtual network interface (VNI)
  • VTAM DSPU (1272)
  • W
  • WAN reroute (1348)
  • WAN restoral (1349)

  • [ Top of Page | Previous Page | Table of Contents | Index ]